small heat sinks with thermal tape for smd

1. 10*10*5

These tiny heatsinks measure just 10mm square and 5mm high. They are finished in black anodising for good heat radiation.

These are ideal where a bit of extra cooling is needed, such as for ICs, 1W LEDs, DC-DC converters, or anywhere you need a small, efficient heatsink. These work extremely well on the small regulator IC in the Raspberry Pi.

· Versatile and compact design

· Easy to install

· Superior heat-conductive adhesive tape(included)

2.6.5*6.5*12

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find a good heat sink. These extra-tall extra-small mini heat sinks are easy to use and give you an extra thermal boost.

The heat sink is a 0.25" x 0.25" (6.5mm x 6.5mm) square with 9 tall 'fins' sticking out the top. The total height is 0.5" (12mm) but you can easily file it down if you need a shorter heat sink to fit in a case). Simply use thermal tape or a small amount of thermal paste to attach to the top of any flat chip. There is no thermal tape included with this product. Ideal for medium flat BGAs, TSSOPs, QFNs, etc.

3.

If you want to heat sink a SoC, motor driver, linear regulator, FET or other surface-mount package part, you might find yourself struggling to find a good heat sink. These little extra-small mini heat sinks are easy to use and give you an extra thermal boost. They're also a great deal, you get a pack of 10 in each order.
The heat sink is a 0.25" x 0.25" (6.5mm x 6.5mm) square with 9 little 'fins' sticking out the top. The total height is 0.15" (3.65mm) so it will fit in any case or enclosure. They even come with a bit of thermal tape already on the bottom! Ideal for medium flat BGAs, TSSOPs, QFNs, etc.